Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateWhy Westminster Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls gate repair, service and installation in Westminster, and we’re not tied to any single manufacturer, so the fix is what your operator actually needs. Ghost Controls builds battery-powered, solar-friendly swing and slide operators for driveways where running grid power is a hassle, and we work on them constantly. We’re an independent service company. We are not authorized, sponsored or warranty-endorsed by Ghost Controls, and we’ll never tell you otherwise.

What sets our Ghost Controls work apart is that we approach these operators as the low-voltage electrical systems they are. We test the battery and solar side before touching the board, because on the Front Range that’s where the trouble usually starts. Call (833) 348-9387 for a free estimate. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Westminster Gate Repair for Your Ghost Controls Gate Repair?
Our technicians know these operators by feel, not by manual. That comes from working on Ghost Controls units every week across the north metro, where battery-and-solar gate operators run on driveways that were never wired for power. We test in a sequence: battery voltage under load, solar charge input, limit switch positions, then the control board itself. Skipping ahead to the board is how a weak battery turns into a billed board replacement.
We use quality parts that fit Ghost Controls equipment, and we choose them based on your gate, not on what’s easiest to stock. When a genuine board, limit switch or actuator arm is the right call, we’ll use it. When a quality aftermarket arm, hinge or length of low-voltage wire does the job better for the price, we’ll say so. Neither approach voids a warranty that’s already expired or misapplied, and we’ll walk you through what affects coverage before we start.
Ron Pennington, our owner, grew up near Standley Lake and trained in electrical and mechanical systems at Emily Griffith Technical College in Denver before starting Westminster Gate Repair in 2018. He built this shop around gates alone, and his habit of diagnosing before quoting carries into every Ghost Controls job. “If the gate isn’t working right, there’s a reason, and we’re going to find it.”
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Fix in Westminster
These operators fail in patterns. Here’s what we see most often on Ghost Controls systems around Westminster, and why each one happens.
- Cold-snap battery sag. The battery pack that runs a Ghost Controls operator doesn’t hold charge the same way when the mercury drops. After a run of sub-freezing nights, the operator alarms out or refuses to cycle at all. The battery, not the board, is the first thing we test on this call.
- Board and limit-switch faults after storms. Front Range lightning and hail season push surge events through outdoor control boards. The tell is usually a gate that reverses mid-travel or stops in the same spot every time. Limit switches drift out of position for the same reason, and so does a swollen control board after a damp spring.
- Undersized or corroded low-voltage wire. The runs to keypads, photo-eyes, intercoms and safety edges are the weak link on any battery-powered operator. Corrosion where wire runs under a gravel apron or meets a post causes ghost open and close commands, or accessories that go dead entirely. We trace the run, not just the accessory.
- Post sag straining the actuator arm. On long swing gates, a post that has heaved or drifted out of plumb forces the arm to fight the gate. The arm strains, the operator bind-stalls, and the limit positions drift until the gate barely opens. Freeze-thaw cycles heave posts every spring across Westminster’s older subdivisions, so this one spikes from March into April.
- Solar charge not keeping up. A panel that’s shaded, dirty or angled wrong leaves the battery short every day until the gate quits. We check solar input alongside battery health, because a tired pack and a weak panel look identical from the driveway.
Ghost Controls Parts & Our Repair-vs-Replace Approach
Parts choice on a Ghost Controls operator is a real decision, not a catalog lookup. We stock genuine Ghost Controls boards, limit switches, actuator arms and battery harnesses where they’re the right call. On the mechanical side, we’ll use quality aftermarket arms, hinges and low-voltage wire where the OEM part is overpriced for the job. A nicked photo-eye harness doesn’t need a new board; it needs fresh wire, spliced and sealed correctly.
Repair comes first when the operator is sound. We only recommend replacement when the housing, gearing and board are all past serviceable life. That’s the honest line, and we hold to it. If you want a straight answer on your Ghost Controls unit, call (833) 348-9387 for a free estimate. Estimates are free, and the price is quoted and agreed before any work starts.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We read battery voltage under load, solar charge input and accessory wiring before we touch the board. On a Ghost Controls operator, that order saves you money more often than not.
- 2
Repair or install. For repair, we match the part to the fault and confirm it fits your operator. For a new install, we size the low-voltage run, set the actuator arm and align the gate before the operator goes live.
- 3
Test and reset. We set the limits, run the gate through a full open-and-close cycle, and check the safety edges and photo-eyes to confirm they stop the gate as they should.
- 4
Warranty on the work. We stand behind our labor and tell you plainly what the manufacturer covers on the part. We don’t promise a warranty we can’t back.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Products We Service & Install in Westminster
We service the full range of Ghost Controls battery and solar operators: single-swing and dual-gate kits, heavy-duty single-swings, architectural and tube-slide operators, and the big-box single-swing kits. That covers maintenance, repair and new installation. We handle battery backup setups, swing gate systems, and intercom and keypad integration on existing operators. If the gate on your property runs a Ghost Controls unit and it isn’t behaving, we can diagnose it. Call (833) 348-9387 for a free estimate.
We Also Service These Brands
We’re a multi-brand shop, so we work on the brand you actually have. Alongside Ghost Controls, we service LiftMaster, Mighty Mule and DoorKing operators, plus other major gate and operator platforms across the north metro. That matters when a part is obsolete or a brand has no local support. We fit the recommendation to your gate, not to what’s easiest to stock. From a single broken hinge to a full automated system installation, one company handles it.
FAQs – Ghost Controls Gate Repair Service in Westminster
No. We are an independent Ghost Controls service provider. We are not authorized, sponsored or warranty-endorsed by Ghost Controls. We repair and install their equipment using quality parts that fit it, and we’ll tell you upfront what that means for your coverage.

Yes. We use genuine Ghost Controls boards, limit switches and actuator arms where they’re the right call, and quality aftermarket arms, hinges and low-voltage wire where the OEM part is overpriced for the job. The part matches your operator, not a generic substitute.
Most repairs take one visit. Battery and wiring faults are often squared away the same day. Board and limit-switch faults can take a bit longer if we need to confirm the part fits your operator, and a new installation is scheduled around the measure. Call (833) 348-9387 for a free estimate and a clear timeline for your gate.
We cover single-swing and dual-gate kits, heavy-duty single-swings, architectural and tube-slide operators, and the big-box single-swing kits, along with battery backup, intercom integration and solar setups. If it’s a Ghost Controls operator on a Westminster gate, we can look at it.
Not by itself. Routine repair and part replacement don’t void a warranty, but what you install matters. We’ll explain what your coverage requires before we touch the operator, so you’re not guessing after the fact.
It depends on the fault. A battery or wiring fix costs far less than a board replacement or actuator arm, and we quote per job after diagnosis. The price is quoted and agreed before any work starts, and the estimate is free. Call (833) 348-9387 for an exact quote.
A weak battery is usually the cause. Cold nights drag a solar-charged pack below threshold, and the operator alarms out instead of cycling. We test the battery and solar input before checking the board. Call (833) 348-9387 and we’ll diagnose it.
Yes. We add keypads, intercoms and safety edges to existing Ghost Controls operators. The trick is sizing the low-voltage run and sealing the splices so corrosion doesn’t cause ghost commands down the road. Call (833) 348-9387 to book a free measure.
Not necessarily. A single side failing often points to a limit switch out of position, a wiring fault on that side, or a programming issue, not a dead board. We test the failing side before we recommend a part. Call (833) 348-9387 for an accurate diagnosis.
We repair solar setups. Ghost Controls operators are built around battery and solar power, and we test panel input, battery health and the charge controller as part of any service call. Call (833) 348-9387 if your solar gate has gone quiet.
Very often, yes. A post that has heaved or drifted out of plumb forces the actuator arm to fight the gate, so the operator bind-stalls and the limits drift. Freeze-thaw heaves posts every spring in Westminster’s older subdivisions. We check post alignment before we replace an arm. Call (833) 348-9387 for a free estimate.
Book Your Ghost Controls Service in Westminster, CO
Whether your Ghost Controls gate won’t cycle after a cold snap or you’re adding a keypad, battery backup or intercom, we diagnose before we quote and set the price before any work starts. We’re a gate specialist, not a generalist guessing at your operator. Call (833) 348-9387 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Ron Pennington, Owner at Westminster Gate Repair, serving Westminster since 2018.