Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Denver
When a gate in Denver stops closing right, the problem is usually older than the gate itself – a heaving post, a hinge worn thin, or an operator that was installed long before modern safety edges existed. We’re gate specialists, not generalists, and we’ve served the Denver area since 2018. That means the brand you actually have on your property – Mighty Mule, LiftMaster, FAAC, BFT, or any of the nine major platforms we work on – is the one we diagnose. Call (833) 348-9387. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Denver Homeowners Call Westminster Gate Repair for Gate Repair
Denver’s older neighborhoods are full of gates that were hung decades ago, and most of the problems we see aren’t the gate’s fault. The post underneath it has moved. Knowing the difference saves you money and keeps a good gate out of the scrap pile. We diagnose before we quote, so you get a straight answer on what can be repaired and what can’t.
Our team handles repair, electric and automated gate repair, and new installation as core services. You deal with one point of contact from the first assessment through the finished job, whether it’s a single broken hinge or a full automated system. We work on both residential and commercial gates, and our technicians know the full range of operator platforms rather than just one maker’s parts.
Response to Denver is quick and dispatch runs daily from 7am to 7pm, Sunday through Friday, with free estimates and the price agreed in writing before any work starts. We’re closed on Saturday. A gate that fails over the weekend can call and we’ll book it for Sunday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Denver
Sliding Gate Repair in Denver is often a story about a century-old masonry pier and a modern aluminum panel learning to live together. When a slider binds or jumps its track, we inspect the track, the rollers, the post footing and the operator’s control board before quoting. Most sliding gate repairs here run $220 to $650, with track and roller work at the lower end and a full re-hang or operator control board replacement at the upper end. The written estimate sets the final price.
When a slider comes off its track
A sliding gate that’s jumped its track is a hazard – heavy panels can crush a hand or a pet. We re-set the track, replace bent rollers and check that the post footings are still true. Do not try to wrestle a heavy panel back onto its track yourself; that’s a job for a trained technician.
Operator and control board faults
Older operators with obsolete control boards can’t always be re-flashed. When that’s the case, we’ll tell you honestly whether a board swap is worth it or whether a new operator is the cheaper answer. This is where an older gate in Denver often needs a real decision, not guesswork.
Wrought Iron Gate Repair in Denver
Wrought Iron Gate Repair in Denver is a different trade from boxed aluminum work, and the pre-war brick piers around Park Hill and Hilltop are where it shows. A hand-fabricated iron gate off a 1920s pier can bind along the grain of the masonry before the panel itself is worn out – usually it’s the hinge post that has moved. Wrought iron repair typically runs $180 to $500, with hinge and post re-setting at the lower end and weld or rust work at the upper end. The written estimate sets the final price.
Hinge and post re-setting
When an iron gate drags, we pull and re-set the post footing and do a sag correction on the hinges before recommending any replacement. A gate that’s still structurally sound can often outlast its repair if the post is put back to true. That’s usually the work, not a new gate.
Weld and rust repair
Denver’s dry air slows rust but doesn’t stop it, and old iron welds do crack. We clean, weld and re-finish affected sections so the gate keeps its shape and swing. When a joint is past repair, we say so plainly.
Trusted Brands We Service in Denver
We work on the brand you actually have. Our technicians are trained across competing platforms, including LiftMaster, FAAC, BFT and Mighty Mule, and we carry parts for the operators most common on Denver gates so turnaround stays short. Multi-brand capability means the recommendation is what fits your gate, not what’s easiest to stock. If you’re not sure what’s on your property, a free on-site estimate will tell you.
Common Gate Repair Problems We See in Denver Homes
- Heaved hinge posts on clay soil. Denver’s clay expands and contracts with every freeze-thaw, and a sagging gate usually fails at the post footing, not the panel. Re-setting the footing is often the whole fix.
- Sun-split wooden gates on west-facing driveways. In Park Hill and Hilltop, the full afternoon high-altitude sun dries and cracks the wood along the grain within a few seasons. Repair often means re-hanging the panel, not just sanding it.
- Obsolete control boards on legacy operators. A board that can’t be re-flashed won’t be fixed by a reset. When it fails, a full operator replacement is usually the honest, cheaper long-run answer.
- Hail and wind-bent panels. Spring storms across the 80206/80207/80220 corridor routinely knock panels out of alignment and bend hinges. A realignment and a check of the safety edges follows.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Denver, CO
Typical Denver gate repair runs $180 to $650 depending on what’s wrong and how old the gate is. Hinge and post repair lands at the lower end, sliding gate track and roller work sits in the middle, and operator control board replacement pushes toward the top. Rust and weld repair on wrought iron runs $180 to $500. We diagnose before we quote, give the price in writing, and confirm it with you before any work starts. Estimates are free.
We Also Serve Cities Near Denver
Beyond Denver, we serve Westminster, Thornton, Lakewood and Arvada. If you’re near the edge of the city and want an on-site estimate, our gate repair team covers the whole area. We’ve served Denver and the surrounding cities since 2018.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Denver
Most of the time it can be repaired. A dragging iron gate on an old brick pier usually has a hinge post that’s heaved out of plumb, not a failed panel – we pull and re-set the footing, correct the hinge sag, and the gate swings true again. Call (833) 348-9387 for a free estimate before you decide on replacement.
West-facing gates in Park Hill take the full afternoon high-altitude sun, so the sun side dries and cracks along the grain while the shaded side stays sound. The fix is often re-hanging the panel rather than sanding, plus checking the post footing. Call (833) 348-9387 for an on-site look.
Sometimes, yes. Older operators with obsolete boards can’t be re-flashed, and a reset won’t fix a failing board. We diagnose before we quote and tell you honestly whether a board swap is worth it or a new operator is the cheaper answer. Call (833) 348-9387.
No – most of the time we don’t. Denver’s clay soils heave post footings out of plumb, and re-setting the footing and correcting the hinge sag usually brings the gate back to true without a replacement. Call (833) 348-9387 with the details.
An automatic gate should have working safety edges and sensors so it stops and reverses on contact, and older gates often went in without them. We can retrofit that equipment on most existing operators. On the operator’s wiring and power, call a trained technician – it’s not a job to take on yourself. Call (833) 348-9387.
Call Westminster Gate Repair for Your Denver Gate
A gate that drags, splits, or won’t close is usually a straightforward fix once someone who knows gates looks at it. We diagnose before we quote, give the price in writing, and confirm it with you before we start. Call (833) 348-9387 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Ron Pennington, Owner at Westminster Gate Repair, serving Denver since 2018.