Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Westminster?
Gate installation in Westminster typically runs $2,800 to $9,500 for a residential driveway gate, including the gate itself, posts, hardware and a standard operator when you want electric. A basic manual garden or side-yard gate comes in much lower, around $900 to $1,800. Commercial and heavy automated systems go higher: $10,000 to $25,000+, depending on span, traffic and access control.
Those are typical, estimated ranges for the Westminster market in 2026. The written estimate you get after we look at your property sets the final number, and the estimate itself is free. We’re gate specialists, not generalists, and we diagnose before we quote. Call (833) 348-9387 to get started.
Key Takeaways
- Most residential driveway gate installations in Westminster land between $2,800 and $9,500.
- Electric and automated gate systems are our core, not a side job. Operator and access control add real cost.
- Soil, grade and the run to a power source move the price more than the gate style does here.
- We work on the brand you have or the brand you want: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule.
- Free estimates, upfront pricing, and one point of contact from repair assessment through installation.
Gate Installation Cost Breakdown (2026)
Here’s how a typical Westminster gate installation breaks down by line item. These are estimated ranges for the local market, not a flat quote. Every property is different, which is exactly why we come out and look before quoting.
| Line Item | Typical Estimated Range (Westminster, 2026) |
|---|---|
| Manual garden or side-yard gate (single swing, wood or ornamental metal) | $900 – $1,800 |
| Single swing driveway gate (ornamental steel or aluminum), manual | $2,200 – $4,500 |
| Dual swing driveway gate, manual | $3,500 – $6,500 |
| Sliding driveway gate, manual | $3,800 – $7,500 |
| Swing gate operator (electric, one leaf) | $1,400 – $3,200 installed |
| Sliding gate operator (electric) | $1,800 – $4,000 installed |
| Dual-gate operator setup (two leaves synchronized) | $2,800 – $5,500 |
| Safety sensors, photo eyes and reversing edges | $350 – $900 |
| Keypad, remote receivers, telephone entry and access control | $400 – $2,500 |
| Concrete footings and post setting | $500 – $1,600 |
| Electrical run to the operator (new circuit, conduit, low-voltage) | $600 – $2,800 |
| Old gate removal and haul-away | $200 – $600 |
| Commercial automated system (high-traffic, access controlled) | $10,000 – $25,000+ |
Add those together and you can see why a simple manual side gate and a fully automated dual-swing driveway entrance live in different worlds. A few things push the number up: a wide driveway that needs a longer or heavier gate, a slope that demands custom posts and extra footing work, an operator with smart access control or telephone entry for a multi-unit property, and running power to a gate that’s far from the house. Things that keep it down: a manual gate, a standard single swing, and a gate that can reuse existing posts and footings.
What a Typical Installation Job Involves
Most jobs follow the same arc. We start with an on-site estimate: gate location, span, soil and grade, where the power will come from, and whether you want manual or automated. From there it’s footings, post setting, gate hang, hardware, then the operator and safety devices if the gate is electric. Access control (keypads, remotes, telephone entry) goes in last and gets tested alongside the safety sensors. That’s the single point of contact customers tell us they value: the same team assesses, installs and confirms the gate works before we leave.
What Affects Gate Installation Pricing in Westminster
- Gate material and span. Ornamental steel and aluminum outlast and out-price wood, and a wider gate needs heavier construction and a stronger operator on either end.
- Soil and grade. Westminster lots in the rolling neighborhoods west of Federal Boulevard often sit on a slope or on front-range soil that needs deeper footing and reinforcement. Flat lots with stable ground cost less.
- Manual vs. electric. The gate is roughly half the job. The operator, safety sensors and wiring are the other half, and they’re the part most generalists avoid. Electric gate systems are our core, so we handle all of it.
- Access control needs. A single remote is cheap. A keypad for a homeowner’s association, telephone entry for a multi-family property, or a wired access system for a commercial lot climbs the number quickly.
- Power source. An operator needs power. If there’s no convenient circuit near the gate, running conduit adds cost. A solar-capable operator on a Mighty Mule or Ghost Controls setup can sometimes sidestep a long power run.
- Permits and site access. Some gate installations in Westminster need a permit, especially when the work touches property lines, easements or electrical. We’ll tell you what to check with the city before we start, and tight lots where equipment can’t pull in add labor time.
The brand of operator you pick also changes the price. We’re factory-familiar with nine major gate and operator brands (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule), so we can match you to the operator that fits your gate and your budget rather than what’s easiest to stock.
How to Save on Gate Installation
You can trim real money off a gate installation without cutting corners on safety, and the biggest savings rarely come from picking the cheapest gate.
- Decide manual vs. electric honestly. A side-yard gate that gets used a few times a day doesn’t need an operator. Skipping automation on a low-traffic gate saves $1,400 to $4,000.
- Reuse what’s sound. If your existing posts and footings are solid, a new gate can often hang on them. That saves the footing line item.
- Bundle install with access control up front. Adding a keypad or remote receiver during installation is cheaper than a separate trip later.
- Plan the power run early. A gate located near an existing outdoor circuit saves the conduit and trenching charge.
- Match the operator to the gate. Overpowering a light gate wastes money. A specialist can right-size the operator instead of selling up.
Our estimates are free and the price is set per job once we’ve seen the site. We don’t upsell operator features you don’t need. Call (833) 348-9387 to book a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace? The Cost Question Behind Every Gate Estimate
A repair is almost always cheaper than a replacement when the gate and posts are structurally sound. A single broken hinge, a stuck operator arm or a control board that’s gone bad typically runs a fraction of new-gate pricing. Replacement makes sense when the gate is rusted through, the posts are leaning, or the operator system is so old that parts no longer fit. We diagnose before we quote. If a repair will keep your gate working for years, that’s what we’ll tell you, and if it won’t, we’ll say so.
Westminster Gate Repair has been handling gate repair, electric gate repair and new gate installation since 2018. Our technicians work on the brand you actually have, so a repair assessment and an installation quote come from the same team.
Electric vs. Manual Gate Installation: What Changes the Price?
Electric automation is the single biggest cost jump in a gate installation. A manual gate’s price is the gate, hardware and posts. An electric gate adds the operator, safety sensors, access control and the power run. Those four pieces are where a generalist gets nervous and where a gate specialist earns their keep. Control boards, operators, sensors and access systems are our primary specialty, not an add-on.
That matters for a Westminster homeowner or property manager who wants the gate installed once and done. If you’re weighing automation, we’ll walk through what an operator, safety sensors and a keypad add to the total, and whether your gate location and power situation make it practical.
Does Gate Installation Require a Permit in Westminster?
Some gate installations in Westminster need a permit, especially when a gate touches a property line, an easement or the electrical supply for an operator. Permit rules vary by lot and by project scope, so the right move is to ask the city’s building department before work begins. We’ll flag what needs checking during the estimate. Permits and inspections, where required, are part of the total job cost and we’ll spell that out in your written estimate.
FAQs – Gate Installation Cost
How much does a driveway gate cost to install in Westminster?
A residential driveway gate installation in Westminster typically costs $2,800 to $9,500 for a standard automated system, or $2,200 to $7,500 for a manual gate depending on material and span. Dual-swing and sliding gates sit at the higher end. Call (833) 348-9387 for an exact quote; estimates are free.
How much does an electric gate operator add to the cost?
An electric swing gate operator typically adds $1,400 to $3,200 installed, and a sliding operator $1,800 to $4,000. A dual-gate setup runs $2,800 to $5,500. Access control, sensors and the power run are separate and can add $400 to $2,800. Call (833) 348-9387 and we’ll size the operator to your gate.
Is it cheaper to repair my gate or install a new one?
Repair is almost always cheaper when the gate and posts are sound. A hinge, operator arm or control board repair runs a fraction of a full installation, which starts around $2,800. Replacement only wins when the gate is structurally failing or the operator is obsolete. We diagnose first, then quote. Call (833) 348-9387 for a free assessment.
Can you install an automated gate for a commercial property in Westminster?
Yes. Commercial automated gate systems typically run $10,000 to $25,000+ depending on span, traffic and access control. We work on residential and commercial automated systems and handle DoorKing, LiftMaster, FAAC, BFT and the other major brands. Call (833) 348-9387 to schedule an on-site estimate.
Do you offer free estimates on gate installation in Westminster?
Yes, estimates are free and the price is set per job from a written estimate. Call (833) 348-9387 to book. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Choose a Gate Specialist for Installation in Westminster
General handyman and garage-door companies dabble in gates. Westminster Gate Repair doesn’t. Every tool in the truck and every hour of experience is dedicated to gates, from a single broken hinge to a full automated system installation. That focus means fewer surprises, a single point of contact from repair assessment through installation completion, and a recommendation based on your gate rather than what’s easiest to stock. We’re also insured and bonded, work with your insurer when a job touches a claim, and stand behind the work with a satisfaction guarantee.
Learn more about our Westminster Gate Repair services, or read about our Westminster coverage. We handle gate repair, electric gate repair and new gate installation, and we work on the brand you have: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule.
Get Your Westminster Gate Installation Estimate
Ready for a real number? Call (833) 348-9387 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Tell us about your gate, your driveway and what you want it to do, and we’ll set up an on-site visit. We diagnose before we quote, and the written estimate you receive sets the final price.
Pricing reflects the Westminster market as of 2026. Westminster Gate Repair offers free estimates – call (833) 348-9387.
Written by Westminster Gate Repair, Owner at Westminster Gate Repair, serving Westminster since 2018.
What Our Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Tracy Hoffman"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Rosa Ramirez"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Beatriz Martinez