Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Denver, CO
Gate installation in Denver starts with the ground and the sun, not the catalog. A 1920s brick bungalow in Park Hill with a narrow side-yard gate needs a different build than a new infill lot in Lowry, and the freeze-thaw cycling here will find any weak footing within a season. We install swing and sliding gates and automate them, and we work on the brands you actually own. Call (833) 348-9387 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Denver Homes Are Different
Denver sits high, dry, and sunny, and that combination does things to a gate that a coastal or lowland city never sees. Clay soils expand and contract through hard freezes, so a post that was plumb in October can heave a half-inch out of line by the end of January. Wooden gates dry, crack, and warp along the grain, and a west-facing gate in Park Hill or Hilltop takes the full afternoon sun, splitting on the sun side within a few seasons while the shaded side still looks fine.
The housing stock splits the work too. The 80206 and 80207 side streets are lined with 1910s-1940s brick bungalows and Tudors with detached garages and narrow side-yard gates, many hanging off century-old masonry piers. Out in Lowry and around 80239 the gates are newer, builder-grade aluminum or steel on tract and infill lots. Spring hail and windstorms bend panels and knock them out of alignment. Any technician worth hiring in Denver reads the pier, the soil, and the sun exposure before suggesting a fix.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Denver Services
Two jobs bring most Denver homeowners to us: repairing a gate that’s off its track or misbehaving, and repairing the electric system that drives it.
Gate Repair in Denver
Mechanical gate repair in Denver is usually about restoring alignment. Posts heaved by expanding clay soil pull the gate out of plumb, hinges sag on old masonry piers, and wooden panels warp on the sun side. We diagnose the actual cause before quoting, because re-hanging a gate on a moving post just means doing it again next year. We handle swing gates, sliding gates, wood, wrought iron, steel, and aluminum, and we fix the hardware the gate already has rather than selling a replacement you don’t need. For sagging, dragging, or stuck gates in the city, see gate repair in Denver.
Electric Gate Repair in Denver
Electric and automated systems are our core work, not a sideline. A gate that opens partway and reverses, an operator that’s dead to the remote, or a safety edge that’s stopped working all usually trace to the control board, the sensors, or the wiring, and Denver’s sun and freeze-thaw cycles age outdoor components faster than most people expect. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so diagnosis matches the system in front of us. For operators and access controls, go to electric gate repair in Denver.
Gate Installation in Denver
Installing a gate in Denver means planning for soil that moves, sun that bakes west-facing wood, and the tight clearances of pre-war side yards. Most of our work here sits on Driveway Gate Installation and Electric Gate Installation, where a new gate has to fit a narrow opening, clear a century-old pier, and survive a half-inch of footing heave. We measure on site, then write a price. Call (833) 348-9387 or ask for a free measure to get gate installation moving.
Driveway Gate Installation
Signs you need it
Your driveway gate is sagging, dragging, or too narrow for the vehicle you actually park in it.
What it costs in Denver
Typical driveway gate installation in Denver runs about $2,800 to $6,500 on a standard residential opening, with material and operator choice driving most of the spread.
How we do it
We set footings to proper depth for the soil, hang the gate plumb to the pier and opening, then test the swing, latch, and clearance by hand before anything else goes on.
Electric Gate Installation
Signs you need it
You’re tired of getting out to open the gate, or an older manual gate is never going to be convenient for the household.
What it costs in Denver
Automating a gate in Denver typically runs about $1,600 to $4,800 for the operator, controls, and safety edges, depending on the gate weight and the access setup.
How we do it
We match the operator to the gate’s weight and swing, run power and controls to the right spot, install the safety edges and sensors, and cycle-test the whole system before we hand over the keys.
What Gate Installation Costs in Denver
| Item | Typical range in Denver |
|---|---|
| Driveway gate installation | $2,800 – $6,500 |
| Electric gate installation | $1,600 – $4,800 |
| Sliding gate installation | $2,200 – $5,600 |
Do I need a permit to install a gate in Denver?
Ask the city’s building department before you start, since permit rules for driveway gates and operators depend on the lot and the power work. We’ll tell you what we know and what to confirm.
How long does a gate installation take in Denver?
Most residential gate installs take one to a few days on site once materials are in, though footings, power runs, and custom fabrication stretch the timeline. We’ll give you a written schedule with the estimate.
Brands We Service in Denver
We work on the brand you have. Our technicians are trained across LiftMaster, FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite, and we stock common control boards and safety sensors so most repairs don’t wait on a special order. Turnaround depends on the part, and we’ll tell you before we order. Explore our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Denver, CO
| Service | Typical range in Denver |
|---|---|
| Driveway gate installation | $2,800 – $6,500 |
| Electric gate installation | $1,600 – $4,800 |
| Sliding gate installation | $2,200 – $5,600 |
| Gate repair (hardware, alignment) | $180 – $650 |
| Electric gate repair (operator, controls) | $220 – $850 |
| Safety edge and sensor replacement | $150 – $450 |
Prices climb in Denver when the footing has to be reset, the gate needs custom fabrication, or the power run is long or complicated. Every price is quoted and agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Denver
Our technicians cover Denver’s core and the surrounding neighborhoods, from the brick bungalows and narrow side-yard gates of Park Hill and Hilltop to the newer infill gates in Lowry. The freeze-thaw heave and sun damage we see on the west side show up across the city, and we route crews accordingly. Response times depend on the day and the job, and we’ll give you a realistic window when you call.
- Park Hill
- Hilltop
- Montclair
- Lowry
- 80239
Service Area – Cities Near Denver
We work across the metro, and Denver is one of the cities we cover from our home base in Westminster. If you’re just outside the city line, check our pages for Westminster, CO, Thornton, CO, Lakewood, CO, and Arvada, CO to see what’s involved in those areas. Same crews, same brands, same written estimate.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Denver
We dispatch crews Sunday through Friday, 7am to 7pm, and same-day repair is often possible when you call early. Call (833) 348-9387 for a free estimate and a realistic window.
We don’t handle HOA paperwork, but we’ll tell you what measurements and specs your board is likely to want and build to those numbers. Check your HOA rules and the city before ordering materials.
Denver, Westminster, Thornton, Lakewood, and Arvada are all within our service area, and we can confirm coverage for other nearby cities when you call. Call (833) 348-9387 to check your address.
Call (833) 348-9387 for a free estimate on gate installation, repair, or an electric gate system in Denver. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday, closed Saturday. Prices are quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Denver Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Mark Thompson"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Tracy Hoffman"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Rosa Ramirez