Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Aurora, CO
Gate Installation in Aurora starts with the ground the gate stands on. This city spreads from 1960s brick ranches near the old core out to sprawling 1990s and 2010s subdivisions on the southeast side, and it sits high and dry on the Front Range at roughly 5,400 feet. That mix means a new driveway gate on an HOA-governed lot and a heavy security gate on an airport-industrial property are two different jobs, with different measurements, different hardware and different rules. We’re a gate-only company: installation, repair and electric gate work, nothing else. Call (833) 348-9387 for a free on-site estimate.
Why Aurora Homes Are Different
Aurora’s gate work splits along a line you can almost draw on a map. In the vast southeastern subdivisions, gates are shared community assets. A driveway gate in 80013 or a community entrance gate further out is often white aluminum or ornamental steel, matched by the HOA board, and any repair has to blend in visually and pass board review. Fixing one of those is a very different task from repairing a rusted chain-link drive gate on an established older lot near the core, where the frame has had decades of weather and the hardware has been patched more than once.
The climate does the rest. Intense high-altitude sun, sharp freeze-thaw swings, heavy spring hail and wind-driven snow and ice all take a toll: frames warp, hinges seize, operators strain, and powder-coat finishes chip and pit. A gate that works fine in a mild climate can bind here after one bad hail season. That’s before you get to the rental and industrial corridors near Buckley SFB and DIA, where access gates carry heavier traffic and stricter security expectations than a home driveway ever will.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Aurora Services
Two jobs come up on almost every Aurora call: gates that have stopped working and need fixing, and electric gates whose operators, sensors or controls have failed.
Gate Repair in Aurora
Manual gate repair in Aurora usually starts with a gate that won’t swing cleanly or won’t latch. Hail-season dents, warped frames, sagging hinges and posts that have shifted in the freeze-thaw cycle are the common culprits. On HOA-owned gates, the repair also has to match the existing style, so we look at the panel, the finish and the bracket before we touch anything. For a closer look at what we handle, see gate repair in Aurora.
Electric Gate Repair in Aurora
When an automatic gate acts erratically – stopping halfway, reversing for no reason, refusing to close – the fault is usually in the operator, the control board, a sensor or the access system rather than the gate itself. Front Range wind and ice put real load on openers, and base-adjacent or airport-industrial gates add traffic volume to the mix. We diagnose the whole system before quoting. Details live on our electric gate repair page.
Gate Installation in Aurora
Gate Installation in Aurora comes down to matching the gate to the lot, the climate and the rules that govern it. In the newer southeast subdivisions, that means white aluminum or ornamental steel that meets HOA standards and holds up to hail and hard sun. On older core lots, it often means replacing a tired chain-link gate with something that swings true on posts set to proper footing depth. Our full Gate Installation work covers measuring the opening, choosing an operator that suits the traffic, and setting the gate up so ice and wind don’t fight it every winter.
Automatic Gate Installation
Signs you need it
You’re driving to open a gate by hand every day, or an old operator keeps stalling under the load of a heavier gate than it was built for.
What it costs in Aurora
An automatic gate system typically runs from around $1,800 to $6,500 installed, depending on the operator, the gate weight and whether a power run is needed.
How we do it
We measure the opening, confirm the gate’s weight and swing, match an operator (LiftMaster and FAAC are common fits), run power and safety edges, and test the full cycle before we leave.
Driveway Gate Installation
Signs you need it
Your driveway has no gate, the old one is bent beyond sensible repair, or an HOA rule now requires a gate that matches community standards.
What it costs in Aurora
A driveway gate installation typically falls between $1,500 and $5,500, with the figure set by size, material and whether it’s automated.
How we do it
We set posts to proper footing depth, hang the gate so it clears the ground and swings without binding, then fit hardware, latches and any operator.
What Gate Installation Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Automatic gate system, installed | $1,800 – $6,500 |
| Driveway gate, installed | $1,500 – $5,500 |
| Operator replacement or new operator install | $700 – $2,400 |
Do I need a permit for a gate in Aurora?
Often yes, depending on height, location and whether the gate crosses a property line or easement. Ask the city’s building department before work starts, and check with your HOA if the gate is community-owned. We’ll walk you through what the estimate needs to cover.
Can you install a gate that meets my HOA’s standards?
Yes. We work with HOA boards regularly and can match white aluminum or ornamental steel styles to what the community requires. Get the board’s specs to us early, since material and finish choices affect the estimate and the lead time.
Brands We Service in Aurora
We work on the brand you actually have. Our technicians are experienced with LiftMaster, FAAC, BFT, Mighty Mule and the other major platforms, and we match parts to your existing operator rather than forcing a substitute. See our brands for the full list. Turnaround depends on parts availability and scheduling.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Aurora, CO
| Service | Typical range in Aurora |
|---|---|
| Automatic gate system, installed | $1,800 – $6,500 |
| Driveway gate, installed | $1,500 – $5,500 |
| Operator replacement or new operator install | $700 – $2,400 |
| Gate repair, manual | $150 – $600 |
| Electric gate repair (operator, board, sensor) | $200 – $900 |
In Aurora, price climbs with gate size, material, whether posts need resetting in the freeze-thaw soil, and whether a power run reaches the gate. HOA-matched finishes and heavier operators add to the figure too. We quote and agree the price before any work starts, so the written estimate sets the final number.
Neighborhoods We Serve in Aurora
We cover Aurora from the older core neighborhoods out to the southeastern subdivisions and the corridors near Buckley SFB and DIA. Response times vary with traffic and the day’s schedule, so a quick call gets you the clearest picture of when a technician can reach you.
- Southeast Aurora subdivisions (80013)
- Buckley SFB-adjacent neighborhoods
- DIA-adjacent and airport-industrial corridors
- Older core ranches and split-levels near 80011
Service Area – Cities Near Aurora
Aurora sits in the middle of a broad service area, and we regularly work the surrounding communities as well: Centennial, CO, Denver, CO, Lone Tree, CO, and Highlands Ranch, CO. If your gate is on the edge of Aurora or just across a city line, the same scope applies: we diagnose, we quote, then we work.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aurora
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Response time depends on your area and the day’s route.
Often yes. Many cities require a permit for a new gate, so ask Aurora’s building department directly. If the gate is HOA-owned or in a master-planned community, the board’s standards also apply. Check both before ordering material.
We serve Aurora broadly, from the core out through the southeastern subdivisions and the corridors near Buckley SFB and DIA. If you’re unsure whether your address falls inside our area, call and we’ll confirm before scheduling.
Westminster Gate Repair is a gate-only specialist, and every job in Aurora gets the same treatment: we diagnose before we quote, and we work on the brand you have. Call (833) 348-9387 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Aurora Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Kevin Sutton"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Paul Hayes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Mark Thompson