Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Centennial, CO
If your gate is leaning, sticking, or the operator has quit, a gate company in Centennial has to know two things most installers miss: this city’s housing runs from 1980s HOA subdivisions to fresh custom builds, and the hail that rolls across the 80111 corridor south of Denver reshapes what a repair actually is. We install and hang new gates built for that reality, whether it’s a driveway swing gate on an older tract lot or an automated slide gate on newer infill. Curious about a replacement? Call (833) 348-9387.
Why Centennial Homes Are Different
Centennial sits at altitude in a semi-arid band where the sun is unforgiving and the temperature swings hard between day and night. That freeze-thaw rhythm works on gate hardware year after year. Wooden gates cup and split. Wrought-iron pivots work loose. Operator housings, which are often plastic or thin metal, crack as they expand and contract. The intense UV fades and embrittles any seal, gasket, or plastic component that faces the sun.
Then comes hail. Season after season, the storms that gather south of Denver drop ice on the same exposed metal gates along south-facing driveways in the 80111 corridor. Ornamental iron takes on dimpled paint and hairline cracked welds, and homeowners frequently don’t notice until the gate stops latching true. Wind gets under a wide panel during a storm and torques the operator arm out of alignment.
Layer on the housing itself: many of these gates are original builder-grade units now 20 to 40 years old and past their hardware’s expected life. In the HOA-governed subdivisions, any replacement also has to match the neighborhood’s style rules, which shapes what we can hang and how it looks from the street.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Centennial Services
Two jobs bring most Centennial homeowners and property managers to us: fixing a gate that’s failed, and diagnosing an electric gate system that’s misbehaving. Each has its own dedicated page.
Gate Repair in Centennial
Manual and automated gates take a beating here. After a hail event, the repairs we see most in Centennial involve bent track rollers, gates that drag or bind, hinges that pull out of aging posts, and iron panels whose welds have started to crack under the dimpled paint. We diagnose the actual failure before touching a wrench, so you’re not paying to replace a part that was never the problem. Whether it’s a single broken hinge or a whole run of hardware, we match the fix to your gate, not to whatever we happen to stock. For the full breakdown of what we fix, see Gate Repair in Centennial.
Electric Gate Repair in Centennial
Automation is our core, not a side job. When an operator opens halfway and reverses, ignores the remote, or stops dead, the cause is usually in the control board, the limit settings, the safety sensors, or the power supply – and that’s the work most generalists avoid. Centennial’s freeze-thaw cycles and cracked operator housings make this a regular call, and we’re familiar with the platforms you’re likely to have, from LiftMaster to FAAC, BFT, and Linear. We test the whole system, not just the obvious part. See Electric Gate Repair in Centennial for the details.
Gate Installation in Centennial
Gate Installation in Centennial starts with the lot and the era of the house. On 1980s and 1990s HOA lots, that means replacing a tired builder-grade gate while staying inside the neighborhood’s aesthetic rules. On newer custom builds, it often means an upgraded automated system matched to what the homeowner wants. Either way, the hail belt south of Denver means the hardware we choose has to take a hit and keep working, and we plan for that from the first measurement. Everything we do for new gates lives under Gate Installation.
Driveway Gate Installation
Signs you need it
Your driveway gate is 20 to 40 years old, sags, drags on the ground, or its post has shifted enough that no adjustment will make it latch cleanly.
What it costs in Centennial
A new driveway gate installation typically runs $2,500 to $7,500, and adding an automated operator pushes the range to $4,500 to $12,000, while a repair on the same gate is usually $250 to $900.
How we do it
We measure the opening and driveway grade, confirm the gate style your HOA will accept, set the posts to proper footing depth, hang and align the panel, and test the latch and any automation before we call it done.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open the gate, or the old operator is cracked, weak, and no longer reliable enough to trust with daily use.
What it costs in Centennial
Automating an existing gate typically runs $1,200 to $3,800 for the operator and controls, while a full new automated gate installation is usually $4,500 to $12,000.
How we do it
We size an operator to the gate’s actual weight and width, mount it, wire the power and safety edges, program the travel limits and remotes, and walk you through the full cycle before we leave.
What Gate Installation Costs in Centennial
These are typical estimated ranges for Centennial. The written estimate after we look at your gate sets the final price, and we quote and agree on that number before any work starts.
| Item | Typical range in Centennial |
|---|---|
| New driveway gate installation | $2,500 – $7,500 |
| Automating an existing gate | $1,200 – $3,800 |
| Full new automated gate installation | $4,500 – $12,000 |
Do I need a permit to install a gate in Centennial?
Most cities require a permit for a new gate, especially one with power or an operator, so ask the City of Centennial building department before you buy. Your HOA may also have style rules. We can point you to what to check.
Will a new gate survive the hail here?
That’s exactly what we plan for. We choose hardware and finishes meant for the exposed, storm-prone conditions along south-facing driveways, and we set posts to proper depth so freeze-thaw won’t throw the gate out of line. Call (833) 348-9387 for a free estimate.
Brands We Service in Centennial
We work on the brand you actually have, not a generic substitute. In Centennial that most often means LiftMaster, FAAC, BFT, and Linear operators and their controls. Because we’re familiar across competing platforms, we can match parts and know-how to your existing system instead of guessing. See our brands for the full list and what we carry.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Centennial, CO
These ranges are typical for Centennial work. Every job is priced per job on the written estimate, and the price is quoted and agreed before we start.
| Service | Typical range in Centennial |
|---|---|
| Standard gate repair | $250 – $900 |
| General gate repair | $150 – $650 |
| Electric gate repair | $200 – $900 |
| New driveway gate installation | $2,500 – $7,500 |
| Automating an existing gate | $1,200 – $3,800 |
| Full new automated gate installation | $4,500 – $12,000 |
What pushes cost up in Centennial is post work on aging lots, storm-related damage that needs several parts replaced at once, and HOA-mandated styles that call for heavier or more finished materials. Whatever the number, we present it upfront and don’t start until you’ve agreed.
Neighborhoods We Serve in Centennial
We cover the whole city, from the 80111 corridor where exposed metal gates line the south-facing driveways to the older HOA subdivisions and newer custom pockets. The hail belt south of Denver keeps us busy across all of it, and the mix of builder-grade and upgraded systems means we carry the parts to handle either. Fast dispatch from 7am to 7pm gets a technician out across Centennial efficiently.
- 80111 corridor
- Foxridge
- Willow Creek
- Smoky Hill
- Cherry Creek Vista
Service Area – Cities Near Centennial
Centennial sits right on the south Denver metro’s edge, and we serve the surrounding communities with the same gate-only focus. If you’re in Lone Tree, CO, Highlands Ranch, CO, Aurora, CO, or Denver, CO, we cover your area too. Call to confirm your address and we’ll get a technician scheduled. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Centennial, CO – Our Local Coverage Area
We serve Centennial and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Centennial
We dispatch Sunday through Friday, 7am to 7pm, and reach most Centennial addresses quickly from our Westminster base. For a repair, same-day service is often possible. Call (833) 348-9387 and we’ll book the next opening. Estimates are free.
We don’t file for you, but we help you know what to check. Centennial HOA subdivisions often have style rules, and the city may require a permit for new or powered gates. Confirm both with your HOA and the city before ordering. Call us to talk it through.
Yes. We serve all of Centennial, from the 80111 corridor to the neighborhoods around Foxridge and Smoky Hill. If you’re unsure whether your address falls in our area, call (833) 348-9387 and we’ll confirm. Estimates are free.
Ready to get your gate working or plan a new one? Call (833) 348-9387 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Reach out to Westminster Gate Repair and we’ll diagnose before we quote.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Centennial Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Amanda Parker"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Kevin Sutton"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Paul Hayes